Welding Smoke Suction

TEKA Filtoo

Condition: new, 2500 m³/h 2500 kPa volume capacity 1600 m³/h feed volume > 99 % 1,1 kW 72 dB(A) 0,58 x 0,58 x 0,9 m 80 kg 230 V / 50 Hz V Particle pre-separator: coarse filter, pre-filter Main particle separator: main filter Cehxsgvq E Do An Amogt Gas separator: activated carbon filter Hose arm: joints inside What is the filtoo? The filtoo filter device newly developed by TEKA is a mobile filter system, for many tasks in the area of ??filtration of smoke and dust and gases can be used. The device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%). at The filtoo is intended to be used for the separation of smoke suitable, which by welding separation and joining processes at the Machining of unalloyed steels, including high-alloy chrome / Nickel steels are released. How does the filtoo work? The Polluted air sucked into the filter system. In a multi-level The filter process filters the particles / gases from the air stream and the clean air is fed back into the work area. Where can the filtoo be used? At welding workplaces, in the workshop area, for soldering applications, at Restorers and locksmiths. What do you get for your money? All you get is a completely ready-to-use "plug and play system" the recording device must be connected before commissioning. How is the filtoo set up? The housing is made of a stable sheet steel construction and is inside as well as provided with a powder coating on the outside. The filter elements are over A maintenance hatch is accessible and can therefore be accessed very easily and quickly can be removed. The system has functional controls.

Year of construction: 2023, Condition: new, TEKA welding fume extraction Model: Filtoo NEW Compact unit Power: 1,1 kW, 230V / 50 Hz, incl. 3 m extraction arm SIG Cgohx An Ajk N D Rromjt Technical data: Filter stage I: Coarse filter ISO 16890 ePMcoarse-45°. Filter stage 2: Pre-filter, ISO 16890 ePM10-55% Filter stage 3: Activated carbon filter Filter stage 4: Main filter ISO 16890 ePM1-80% Fan capacity 1600 m³/h Motor power 1,1 kW Current consumption 7,0 A Current type 1 PH+N+PE Noise level approx. 72 dB(A) Plant color: RAL 7016 (anthracite gray) dimension WxDxH approx. 580x580x900 mm weight: 80 kg Description: The newly developed filtoo filter unit is a mobile filter unit, which can be used for many in the field of filtration of smoke, dust and gases, dusts and gases. The unit has been tested on the basis of DIN EN ISO 21904-1/2 and is IFA certified for welding smoke class for welding smoke class W3. Separation efficiency 99 when used as intended, the filtoo is suitable for the separation of smoke fumes generated by welding separation and and joining processes during the processing of unalloyed unalloyed steels, including high-alloyed nickel chromium steels. Function: By means of the extraction arm or other capture devices, the air contaminated with pollutants is contaminated air is sucked into the filter system. is sucked in. In a multi-stage filtering process the particles or gases are filtered out of the are filtered out of the air stream, and the clean air is fed back into the work area. Field of application: Welding workplaces in the workshop area for soldering applications for restorers in locksmith shops You get a complete ready to use "Plug an Play System" only the acquisition- and device must be connected before connected before commissioning.

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Cgohx Anol Dw U Dj Amjt Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: used, Year of construction: 2014, machine/vehicle number: 950144105510003, Lg.No. 25044 Welding mist filter system with spark pre-separator + extraction arms Technical specifications - Upright design for filtering welding mist + grinding dust - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with chromium + nickel content of over 30% - Exhaust air can be vented into the work area, e.g., for heating, or outside Cgohx An Ajwgd A Ajmst - TEKA control system - Air flow rate up to approx. 5000 m³/h - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning method with separation efficiency > 99% - Separate control cabinet - Connection 400 V / 5.5 kW - Space requirement of filter cube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg

Condition: good (used), Year of construction: 2017, Functionality: fully functional, volume flow: 1,000 m³/h, pressing: 10,000 Pa, power: 5.5 kW (7.48 HP), TEKA Filtercube 4N 1000 MV filter extraction system, built in 2017, with pre-filter. Welding fume extraction, room filter, and laser extraction. Motor power: 5.5 kW Flow rate: 1000 m³/h Max. pressure: 10,000 Pa Cjhx Anov T A H Is Amjgt Weight: 350 kg The system can be loaded with a forklift for transport. #8336

Condition: excellent (used), Functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. Cjhx Anev Tb A Ie Amsgt 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Fully functional. For further information, see the rating plate.

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Cshx An Ajv Taq Rsmogt Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: new, Year of construction: 2024, operating hours: 5 h, Functionality: fully functional, machine/vehicle number: A24013210011001, Equipment: type plate available, As good as new filter system, only used for demo purposes on a laser cutting system Machine is available immediately EcoCube basic version 5.5 kW Stat. Item No.: 84213925 Weight: approx. 491.00 kg Incl. spark pre-separator FVS 4000 (original packaging) Cgehev E U Uzox An Amst No spark trap, but conversion for nozzle NW315 Incl. high-temperature hose 4 meters Incl. bend NW 315 90°

Condition: good (used), Year of construction: 2005, operating hours: 2,307 h, suction capacity: 6,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, filtering, welding fume extraction, self-cleaning patron filter, pneumatic filter, vacuum filter for plasma, laser, sandblasting, sodding, shot blasting and all kinds of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2005 2307 hours worked Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" system The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan. Capacity 6000 m3/h Cgohorrvhcjx An Amst Vacuum pressure 3000 Pa Filtration area of 100 m2 Control cabinet. Noise suppressor Possibility to order new filter cartridges tailored to the customer's needs

Year of construction: 2000, Condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Cgohx An Asmf Uzxsmjt Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 11 kW (14.96 HP), Equipment: documentation/manual, 3 Teka Pusch Pull fume extraction units for sale. The three units are sold together. Price 14400Eur, net. The units are equipped with Easy-Cleain-Plus filter cartridges. They were used in a welding plant with an area of 800 sq m from 2017 to 2020. Due to a change of activity, the 3 units are for sale together with the installed network. The units can be viewed after consultation in operational condition. The Push Pull system is excellent for cleaning the air in halls where local extraction is not sufficient for some reason or has a negative impact on productivity. The suction openings are placed at a height of approx. 5-6 meters, and the cleaned air is returned to the opposite side of the hall. The system collects and filters harmful substances on the suction branch, and the cleaned air is returned to the space on the pressure branch. It is possible to inhale fresh air on the suction line. Filter equipment: TEKA FILTERCUBE 4H – 11 kW (3DB) Fixed installation extractor and cartridge separator with automatic filter cleaning. The used “Easy Clean+ ” cartridges are provided with a protective layer (“precoat”) during production, which ensures surface filtration, thus high (>99%) filtration efficiency (BIA M filter class) and a long service life. Automatic pulse cleaning is ensured by built-in membrane valves and the microprocessor “Pulse Control” control, which is easy to operate and programmable according to the current requirements. Dirt accumulated on the surface of the filters leads to an increase in the pressure difference (constantly monitored before and after the filters). The control starts the pulse cleaning when the preset value is reached. The dirt thrown off by each pulse falls into the dust container, which must be emptied periodically. The cleaning pulses can be activated either by timing or manually. The text display shows the current operating status (pressure drop, operating hours, date, etc.). Technical data FC 4H 11kW: Pre-filter: perforated baffle Filter area [m²]: 100 (4 cartridges 25m²) Filter cartridge: BIA M Control: Pulse-Control Current consumption [A]: 0.3 Fan capacity [m³/h]: 8,000 (at operating point) Pressure [Pa]: 2,500 (at operating point) Motor power [kW]: 11 Power supply [V/Hz]: 400/50 Current consumption [A]: 22.5 Motor control: Star-Delta connection Noise level [dB(A)]: approx. 78 Intake port: Ø400mm on the left Exhaust port: Ø450mm on the right Dimensions (WxDxH) [mm]: Approx. 800 x 800 x 2920 Floor area of the Filtercube 4H extraction units: 800x800mm)  Each device is IFA (BGIA) certified in accordance with DIN EN ISO 15012-1. The biggest advantage of the Push Pull system is that it works unnoticed, without the need for workers, thus having a positive effect on productivity. The filter cartridges are cleaned using the microprocessor CONTROL UNIT2 control and the special POWER-SPRÜH system. CONTROL UNIT2 filter control The microprocessor CONTROL UNIT2 filter control can be monitored via a plain text display. This control monitors all operations of the extraction and filtration unit. It determines the amount of compressed air required for cleaning, based on this the air volume can be adjusted and the control can be changed manually or even Cshst A Uiiox An Amegt depending on the pressure difference and time. There is also a possibility to remotely indicate the filter status. The control is connected to the operating hour counter and a clock.

Condition: reconditioned (used), Year of construction: 2018, type of input current: AC, input voltage: 400 V, volume flow: 3,800 m³/h, filter area: 100 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, compressed air connection: 5 bar, power: 55 kW (74.78 HP), nominal current: 12 A, frequency: 50 Hz, input current: 25 A, motor voltage: 400 V, Equipment: type plate available, Dust extraction, welding fume extractor, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, sod, shot blasting and all types of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys version 2 Production year: 2018 Filter cleaned by microprocessor control with compressed air pulses during operation ensuring high efficiency of the device. Low compressed air consumption thanks to "Power-Spray" system The Filtercube central filter unit with cartridge filters is the ideal solution for almost all problems in the field of smoke and dust filtration. The fan is located on the clean side, which minimizes the risk of explosion. Application central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general indoor filtering (push-pull system, displacement system) extraction system in combination with extraction table Extraction system for sanding non-exploding materials Cgehx Aer H Hitjn Amjt Parameters: 5.5 kW fan Capacity 3800 m3/h Vacuum 3250 Pa Inlet diameter: 250 mm Filter surface of 100 m2 Machine is delivered completely ready for use including NEW set of 4 cartridge filters. Placed on top of machine support to accomodate for dust disposure in 200L standard barrel.

Year of construction: 2014, Condition: ready for operation (used), Motor power: 7.5kW, air volume flow: 8000m³/h, negative pressure: 4600Pa, filter area: 100m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 800mm/900mm/3200mm, weight: approx. 400kg. Documentation available. On-site inspection is possible. Cgshx An Asvyiqtomjt

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: Cjhx Ansu Aafdj Amegt - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: used, Year of construction: 2003, suction capacity: 3,000 m³/h, negative pressure: 3,000 Pa, Welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter TEKA Cartmaster . For welding, grinding and all types of dry dust. Cartridge filter insert. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Year of manufacture - 2003 Fan with a power of 1.5 kW. Efficiency 3000 m3/h Vacuum max 3000 Pa Stock no. - 0956 Cshxjv Hxadj An Amjgt

Condition: used, Year of construction: 2006, machine/vehicle number: 3301810011001, The system consists of a TEKA graphite extraction system type PF/S Cgshovg Exysx An Amet in connection with a TEBARON air cleaner The system is fully functional with the corresponding accessories.

Year of construction: 2010, Condition: ready for operation (used), Volume flow: 1000m³/h, max. depression: 10,000Pa, motor power: 5.5kW, weight: 350kg. Cgohohz Dx Sex An Amot

Year of construction: 2007, Condition: good (used), Offer 22206 + 22207 Technical data: - Boom length approx. 6 m each Cohx Ansh Ekv Es Amogt - 5 joints each - Suction pipe diameter 125 mm - Wall connection - brackets - Weight approx. 100 kg each

Condition: excellent (used), Year of construction: 2003, operating hours: 2,000 h, suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extractor, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand: TEKA Cohx Anottuime Amegt Model: Filtercube 2H Year of manufacture: 2003 Operating hours: 2000 Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: Sound-insulated fan of 4 Kw. Capacity 5000 m3/h Vacuum pressure 3000 Pa Inlet diameter : 315 mm Filtration area: 50 m2 spark pre-catcher control cabinet Possibility to order new filter cartridges tailored to the customer's needs stock no.:0846

Condition: good (used), Year of construction: 2019, machine/vehicle number: 9501441040100301, Offer 24469 Welding mist filter system with spark pre-separator + extraction arms Technical data - Vertical version for filtering welding fumes + grinding dusts, - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with - chromium + nickel content of over 30% - Exhaust air can be discharged into the work area, e.g. for heating or outside - can be - TEKA control unit - Air volume flow up to approx. 4000 m³/h Cgohx An Aouwl Dusmst - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning system with separation efficiency > 99 % - Separate control cabinet - Connection 400 V / 4 kW - Space requirement Filtercube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg - Separate spark pre-separator make TEKA type FVS 4000 - 6000 - Space requirement spark separator W 850 x H 1650 x D 950 mm - 3 articulated extraction arms - Pipework

Condition: good (used), Year of construction: 2016, operating hours: 5,268 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: TEKA Model: Filtercube 2H Cehotpvcyox An Amogt Year of manufacture: 2016 operating hours: 5268 Filter cleaned by microprocessor controller with compressed air pulses during operation by which high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: Sound-insulated fan with a power of 3 Kw. Capacity 4000 m3/h Vacuum pressure 3000 Pa Inlet diameter : 315 mm Filtration area: 50 m2 control cabinet technical documentation Possibility of ordering new filter cartridges tailored to the customer's needs.

Condition: good (used), Year of construction: 1998, Offer 24465 Technical data: - mobile cartridge filter unit with 2 articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - 2 x articulated extraction arm 360° 4000 mm - Extraction volume up to 1100 m³/h - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter with indicator light Cjhjuz Uy Hjx An Amegt - Particle pre-separation through baffle plate - Filter cleaning via compressed air gun through maintenance door - Drive - fan 220 V / 2.20 kW - Space requirement approx. W 660 x H 1600 x D 780 mm - Weight approx. 200 kg - Suction hoses were taped with adhesive tape by previous owner

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Cohx Anjrhidme Amjgt Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Cgohsib Dadox An Amet Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Year of construction: 2019, Condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Cgohx Anonyhvqe Amjt Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.