High performance drilling machine; Production drilling machine

ALZMETALL Abomat 20

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 Dcobsikrtqovqlxgsg throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: excellent (used), Year of construction: 1986, bore diameter 65 mm throat 380 mm Control PLC-Steuerung bore spindle turning speed range 63 - 1600 U/min Dcebvqleucgqqexgog table-size 630 x 500 mm rapid traverse Z-axis 4,75 m/min boring feeds: 0,05 - 0,56 mm/U total power requirement 9 kW weight of the machine ca. 2,0 t dimensions of the machine ca. 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed manually via gear shift. Pole-changing motor with 1,500/3,000 rpm. with mechanical overload clutch

Condition: used, Year of construction: 1979, Drilling capacity: 35 mm Mounting type: MK 4 Feed rate: 0.04, 0.07, 0.10 ,0.14, 0.26, 0.40 Speeds: 63, 125, 180, 250, 355, 500, 710, 1400 Digital display in Z: 720 mm Cross table:x= 460 y= 280 mm drilling capacity in GG 20: 45 mm Debvsbn R Aloqlxgjcg with cam control Cross table

Year of construction: 1982, Condition: ready for operation (used), Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible. Dcjbvevyiq Teqlxgog

Year of construction: 1984, Condition: used, weight 1,4 t Dcobjnl Nq Hjvqlxgeg

Condition: used, Year of construction: 2001, With positioning table Heidenhain controller - Year: 2001 - Documentation available: Yes - CE mark available: Yes - Serial number: 856 - Control: CNC - Motor power: 3.0kW - Spindle speed max.: 3000rpm - Model: omboormachine - Digital readout: Yes - Tool holder: SK30 - Table width: 310mm - Table length: 980mm - Drilling capacity: 32mm Dcebvqewh Smlolxgsg - Travel X: 450mm - Travel Y: 900mm - Spindle diameter: 30mm - Travel Z: 300mm - Max. reach: 322mm - Type digital: Ingebouwd - Number of axes: 3 - Spindle speed min.: 1rpm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm Dcebvqljvithzsxgsg switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: good (used), Year of construction: 2011, Functionality: fully functional, ALZMETALL AX 4 / SV Pillar Drill 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: Used Year of Manufacture: 2011 Drilling Capacity: Steel E335 (St 60) 55 mm Thread Cutting: Steel E335 (St 60) M 42 Cast Iron EN-GJL-200 M 56 Short Spindle MT 4 Spindle Stroke 140 mm Usable Throat 300 mm Column Diameter 145 mm Machine Table, Usable Support 615 x 430 mm Spindle-Table Distance min./max. 150/735 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Debvqlxswbqd Aegocg Feed rate 0.1 + 0.3 mm/rev Machine height: approx. 1850 mm Net weight: approx. 380 kg Infinitely variable drive Motor: 1500 rpm Power: 3.0 kW Spindle speed: 70-2400 rpm Standard equipment: Main switch with lockable motor protection switch Mushroom push button (latching) for emergency stop Infinitely variable speed adjustment Digital speed display Feed overload protection Protection class: IP 54 Spindle protection with electrical protection Available options: – 12. Machine light – 20.1 Thread cutting device – 24. Coolant system in the base – 37.1 Digital drilling depth indicator – 50.6 Drilling depth fine adjustment 0.1 mm – Combination table – Original documentation

Year of construction: 2008, Condition: good (used), It is a used Häussler double line Habomat 20 (built in 2008) for sale. - Fuel Type: Pellets - Pellet container mounted in the middle - Temperature range: up to 360 °C - Baking surface: 90 x 150cm (each oven) Dcjbvouk Ir Hsqlxgjg Price on request.

Condition: used, Offer in progress! Dcjbvqlewh Ug Uoxgjg

Condition: excellent (used), Trumpf CS 20 copier punch Manufacturer: Trumpf Type: CS 20 Control unit: conventional Incl. various accessories as per photos Year of construction: 10/1976 Weight: approx. 6000kg Dcsbvovmrcrsqlxgsg Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse, plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: used, Functionality: fully functional, machine/vehicle number: 294, spindle speed (max.): 1,250 rpm, spindle speed (min.): 40 rpm, total height: 2,300 mm, drilling capacity: 50 mm, total width: 970 mm, total length: 1,300 mm, spindle mount: MK 5, drilling depth: 240 mm, table width: 870 mm, table length: 670 mm, overall weight: 1,200 kg, Dear Sir or Madam, We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. Djbvsv T Aursqlxgecg No returns accepted.

Condition: excellent (used), Year of construction: 1975, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Debowg Hd Njvqlxgjcg Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1975 With coolant system!

Condition: excellent (used), Year of construction: 1987, ALZMETALL AB 3 ESV, built in 1987 Drilling capacity in steel (diameter) 40.0 mm Drilling capacity in cast iron 35.0 mm Tapping capacity in steel M22 Throat 285 mm Spindle stroke 160 mm Speed 65 - 1750 rpm Table size 500 x 370 mm Column diameter 130 mm Feed rate 0.1-0.2-0.3 m/min Spindle mount MT 3 Motor power 1.0 / 1.6 kW Weight 400 kg Machine comes from a vocational school Dcsbvqsv T Nfdolxgeg Very good / well-maintained condition (!!) Equipment: - Thread cutting device - Robust motorized column drill with VARIO drive (V-belt) - Electro-automatic spindle feed - Pole-changing motor - Continuous speed adjustment (VARIO drive) - Adjustable drilling depth stop - Machine table with 2x T-slots 2 x 14 x 224 - Height adjustable via hand crank - Connection cable + connector - Original operating instructions with original circuit diagram - Mandatory and prohibition signs affixed according to the new Machinery Directive. - Upon request, a work spindle guard integrated into the emergency stop chain can also be installed. The machine can be inspected and tested on-site by appointment. Technical details and errors excepted.

Condition: used, Year of construction: 1988, Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Debvjwgkyujqlxgocg Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg

Condition: used, Year of construction: 2020, Brötje Oil Condensing Boiler BOB 20 B including 200 l Hot Water Tank Oil Condensing Boiler Specifications Type: BOB 20 B Year of Manufacture: 2020 Heating Output: 14.5 - 19.5 kW Item Condition: Used Manufacturer Number: 20021436 Brötje 200 l Hot Water Tank Dcebvqlxewhkt Rjgsg Type: EAS-T 200 D Enamel Year of Manufacture: 2020 Nominal Capacity: 200 l Manufacturer Number: W062206467

Condition: refurbished (used), Year of construction: 1980, Functionality: fully functional, For sale is a drilling and milling machine from Alzmetall type Plus 3 DG The machine has been completely dismantled and overhauled. Inspection and test run possible at any time. Forklift available for loading Djbvqljwhi Rnjxgocg

Condition: good (used), Year of construction: 2002, 1 used pillar drill Brand Alzmetall Type AX 3 SV Year of manufacture 2002 Drilling capacity in steel 60 steel: 40 mm Tapping capacity in steel 60 steel M 24 Tapping capacity in cast iron 20 steel M 30 Spindle speeds - continuously variable 160-1250 rpm Short spindle MT 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table - usable support 515 x 360 mm Dcjbvevm Un Doqlxgog Distance between spindle and table min./max. 117/701 mm T-slots number - width - spacing: 2 x 14 x 224 mm Feed rate: 0.1 + 0.2 mm/rev Machine height: 1840 mm Equipped with: Tapping device Mushroom push button (latching) for emergency stop Infinitely variable speed adjustment Technical specifications: Errors excepted

Condition: excellent (used), Year of construction: 1976, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Dsbswg Hdvovqlxgecg Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1976 With coolant system!

Condition: ready for operation (used), Spindle taper MT 5 Drilling capacity in steel 65mm Throat 390mm Table size 880x670mm Spindle speeds , inf. variable 40-800 rpm Dcjbod H S Alevqlxgeg MARCELS MASCHINEN CH

Year of construction: 2025, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status Djbvqlov Sybyexgscg - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: new, Drilling capacity in St 60 40 mm Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm Dcsbvsifkpwsqlxgsg machine table - usable support 514x360 mm T-slots number - width - distance 2 x 14 x 224 mm distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Machine weight approx. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right/left rotation - motor protection switch - Speed adjustment stepless - digital speed display - feed overload protection - protection class IP 54 - Connector plug (ready mounted, cable length 2 m) - Spindle protection with electrical fuse

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm total power requirement 4,4 kW weight of the machine ca. 1,7 t Djbvqjwftt Islxgecg

Year of construction: 1990, Condition: good (used), Technical data - Clamping surface (left-right): 370 mm - Clamping surface (front-rear): 614 mm - Control: electronic control - quill stroke: 180 mm - Speed range up to: 55 - 5000 rpm - throat: 320 mm Dsbvqohnc E Uelxgjcg - Tool holder: MK 4 - Connection voltage: 400 V - Total height approx.: 2.06 m - Documentation - Weight approx.: 600 kg

Year of construction: 1991, Condition: good (used), Technical data Dcobehnc D Tovqlxgog - Clamping surface (left-right): 390 mm - Clamping surface (front-rear): 420 mm - Control: electronic control - quill stroke: 120 mm - Speed range up to: 7500 rpm - Tool holder: MK 3 - Connection voltage: 400 V - Mains frequency: 50 Hz - Total height approx.: 1.90 m - Documentation - Weight approx.: 400 kg